How to Power a Propane Tankless Water Heater During an Outage
Updated November 2026
Quick answer: A propane tankless water heater still needs electricity to fire its ignition control board, fan, and sensors, so a grid outage shuts off hot water even though the fuel keeps flowing. A small power station in the 250-300Wh class, like the Anker SOLIX C300, easily covers the 10-50W standby draw and the brief ignition surge for days. If you also want to backup other appliances at the same time, step up to the Anker SOLIX C1000 Gen 2.
Why a Gas Water Heater Still Needs Electricity
Homeowners are often caught off guard the first time a power outage kills their hot water even though they have a propane or natural gas tankless unit. The confusion is understandable: these units burn fuel, not electricity, to heat water, so it feels like they should keep working no matter what. In practice, every modern tankless water heater - propane or natural gas - relies on a low-voltage electronic control board to do three jobs the gas itself cannot do.
First, the board monitors water flow through a sensor and decides when to call for heat. Second, it drives a combustion fan that pulls in air and vents exhaust, which safety codes require on nearly every tankless model sold since the mid-2000s. Third, it fires the electronic igniter - either a spark igniter or a hot-surface igniter - that lights the burner. Without grid power, the control board is dead, the fan does not spin, and the gas valve never opens, no matter how much propane is in the tank.
This is different from an old-fashioned standing-pilot tank water heater, which really can run through an outage because the pilot light itself provides the ignition source and a thermocouple generates just enough millivolt power to hold the gas valve open. Tankless units traded that simplicity for much higher efficiency and compact size, and the electronic ignition is the price of that efficiency.
How Much Power Does a Tankless Heater Ignition System Actually Use?
This is the good news: compared to anything that produces heat directly with electric resistance, a propane tankless heater's electrical load is tiny. The propane itself does all the heavy work of warming the water; electricity only runs the "brain" and the fan.
| Component | Typical draw | When it runs |
|---|---|---|
| Control board / standby | 2-10W | Constantly, waiting for flow |
| Combustion fan | 20-50W | Whenever a hot water tap is open |
| Spark or hot-surface igniter | 50-120W (hot-surface can spike higher) | Only for a few seconds at startup |
| Typical combined running load | 30-80W | While water is flowing |
Most residential units draw somewhere between 30W and 80W while actively heating, with a short-lived spike during ignition that a quality power station's surge rating absorbs without issue. That is a fraction of what even a single incandescent space heater draws, and it is why a power station sized for a propane water heater's ignition system can be dramatically smaller and cheaper than one sized to run an electric water heater, a sump pump, or a refrigerator.
If you want to be precise rather than rely on published averages, check the data plate on your specific unit (usually on the side panel near the control board) or the installation manual's electrical specifications section, which lists the exact voltage, amperage, and startup surge for your model.
Sizing a Power Station for Ignition-Only Backup
Because the load is so light, sizing math here is refreshingly simple compared to whole-home backup planning. Use this approach:
- Confirm continuous wattage. Any power station rated for 300W of continuous AC output or more will run a tankless heater's fan and control board without strain, since the actual draw tops out around 80W in most cases.
- Confirm surge headroom. Look for a power station with at least 2-3x your heater's running wattage in surge capacity to cover the igniter's brief spike. Nearly every power station on the market, even entry-level 300W units, clears this bar easily because the ignition spike is still well under 200W.
- Calculate runtime for your household's actual showering pattern. A family of four running a combined 90 minutes of hot water a day at 50W average draw uses about 75Wh daily - a number so low that even a compact 288Wh unit covers several days unplugged, before accounting for any recharging.
- Decide if you want automatic switchover or manual plug-in. Some power stations offer a UPS/pass-through mode that detects a grid outage and switches to battery power within milliseconds, keeping the water heater's control board from ever losing power. Others require you to physically unplug the heater from the wall and plug it into the power station, which is fine for a tankless heater since it reboots and re-ignites instantly rather than needing a continuous electrical connection.
For a deeper walkthrough of this math applied to your whole house rather than a single appliance, see our power station wattage calculator and guide to calculating power needs before buying.
Best Power Stations for Propane Tankless Water Heater Ignition
| Power station | Capacity | Continuous output | Best for |
|---|---|---|---|
| Anker SOLIX C300 | 288Wh | 300W | Ignition-only backup, lowest cost |
| Jackery Explorer 300 Plus | 288Wh | 300W | Budget alternative with similar runtime |
| Anker SOLIX C1000 Gen 2 | 1,024Wh | 1,500W | Water heater plus other appliances |
| BLUETTI AC180 | 1,152Wh | 1,800W | Fastest automatic switchover for sensitive control boards |
Anker SOLIX C300: The Right-Sized, Lowest-Cost Pick
For the specific job of keeping a propane tankless heater's ignition system alive, the Anker SOLIX C300 is close to perfectly sized. Its 288Wh capacity and 300W continuous output comfortably exceed the 30-80W actual running load, with plenty of margin on the igniter's brief surge. At 288Wh, it can supply roughly 3-5 days of normal daily hot water use on a single charge before needing to be topped off, and its compact, lightweight body means it can live in a utility closet or on a shelf next to the water heater itself rather than taking up garage floor space. This is the unit most households should start with if a tankless heater's ignition system is the only thing they need to keep running.
Check the Anker SOLIX C300 price on Amazon to see current availability. For a full breakdown of its ports, charging speed, and app features, read our complete Anker SOLIX C300 review.
Jackery Explorer 300 Plus: A Comparable Budget Option
The Jackery Explorer 300 Plus sits in the same capacity class as the SOLIX C300 and makes a solid alternative if you already own other Jackery gear, prefer Jackery's charging cables, or catch it on a better sale. Either unit handles this job equally well, since the limiting factor is the water heater's tiny draw, not the power station's ceiling.
Check the Jackery Explorer 300 Plus price on Amazon.
Anker SOLIX C1000 Gen 2: When You Want More Than Just the Water Heater
If you would rather have one power station cover the water heater's ignition system along with a refrigerator, a few lights, and device charging during a longer outage, size up to the Anker SOLIX C1000 Gen 2. Its 1,024Wh capacity and 1,500W continuous output leave enormous headroom above the water heater's needs, and fast solar input means you can realistically keep everything running through a multi-day outage with a couple of portable panels. Read the full Anker SOLIX C1000 Gen 2 review before buying if you are considering this broader setup.
BLUETTI AC180: Fastest Automatic Switchover
If your household cannot tolerate even a brief gap in control-board power - for example if the heater is paired with a smart thermostat or a recirculation pump that resets awkwardly - the BLUETTI AC180 switches over in under 20 milliseconds, fast enough that sensitive control boards never register the gap. It costs more than the small single-purpose units above, but the near-instant UPS switchover is the reason to choose it over simply plugging in after the fact.
Installation: Plug-In vs. Transfer Switch
Most propane tankless water heaters plug into a standard wall outlet rather than being hardwired, which makes backup power straightforward. The two practical approaches are:
- Direct plug-in (manual): When the power goes out, unplug the water heater's cord from the wall and plug it directly into the power station's AC outlet. Tankless units reboot and are ready to ignite again within seconds, so there is no meaningful downside to this brief manual swap. This is the simplest and cheapest approach and works with any power station on this list.
- UPS pass-through mode (automatic): Leave the water heater plugged into the power station at all times, and leave the power station itself plugged into the wall. When grid power drops, the power station's internal transfer switch takes over automatically, usually in 10-30 milliseconds depending on the model. This is more convenient if the water heater is in a hard-to-reach spot, but confirm your specific model supports continuous pass-through charging without degrading the battery, since not every power station is designed to sit plugged in year-round.
Whichever approach you choose, never attempt to hardwire a power station's output into household wiring or bypass the water heater's factory power cord - that crosses into work that requires a licensed electrician and a proper transfer switch, which is a different project than simply running an appliance that already has a standard plug.
What About Natural Gas Tankless Heaters?
Everything above applies equally to natural gas tankless units. The fuel source does not change the electrical reality: natural gas tankless heaters use the same type of electronic control board, combustion fan, and igniter as propane models, and the wattage draw is essentially identical. If your home runs on natural gas rather than propane, the same power stations and sizing math apply without modification.
Common Mistakes to Avoid
- Assuming "gas" means "no electricity needed." This is the single most common and costly misunderstanding, and it leads people to skip backup power planning entirely for an appliance that absolutely needs it.
- Oversizing for a job that does not need it. Because the actual draw is so low, there is rarely a reason to dedicate a large, expensive power station solely to ignition backup unless you are also running other appliances from it.
- Ignoring the battery backup of a standard outlet. If your water heater's outlet is on a GFCI-protected circuit shared with a bathroom, confirm the power station's outlet is a standard grounded outlet and that your extension cord, if used, is rated for the load.
- Forgetting the thermostat or recirculation pump. Some installations add a smart thermostat or hot water recirculation pump that also needs power; factor their small draw into your runtime math alongside the heater itself.
For broader outage preparedness beyond this one appliance, our guide to using a power station for home backup during outages and 2026 power station buying guide cover whole-house planning in more depth, and if your home also relies on a well or sump pump, see how to run a water pump with a power station.
Frequently Asked Questions
No, not without backup power. Even though the burner runs on propane, the control board, combustion fan, and igniter all require electricity, so the unit will not fire without it.
A compact 288Wh power station with 300W continuous output, such as the Anker SOLIX C300 or Jackery Explorer 300 Plus, covers the typical 30-80W running load and brief ignition surge with room to spare for several days of normal use.
Yes, as long as the power station has a standard AC outlet rated for at least 300W continuous output. There is no special wiring required since the heater already uses a standard plug.
No. The heater's electrical draw is fixed by its control board and fan, not by the power station's size. A larger unit only adds longer runtime or the ability to power additional appliances at the same time.
Yes. Natural gas tankless units use the same type of electronic ignition, fan, and control board as propane models, with a nearly identical electrical draw, so the same sizing and power station choices apply.